Eibach springs

Surley they got to be a bolt/nut to hold the spring on the shock otherwise pop and the wheels would fall off..... :oops:

Sorry for the Hi-jack of thread pauly but am i right in thinking that turning the spline on the torsion bar once is 30 degree angle meaning 30mm?

not neccecarely measure it its the best way

Hmmm one of the tutors said today but yeah il measure it incase :mrgreen:

ur torsion bar will be different than mine. but either way measure to be safe and make sure ur on level grounds

Axel stands a tape measure and as Shaun says gotta be sure....plus tried and tested by Shaun and his Megane is bang on level...

yeh do it drive it round for a bit take it a level ground measure it again then adjust it again till its right. takes a while but its work it. BTW if its on standard shocks it will be bouncy so strap in lol

Bouncy wow i nearly took off coming back from Kirkham down the bypass just after the pirson junction on on way to Preston (you probably know the bumps just before the bend) but it feels better round the bends no roll.

Well guys the Eibach springs are on the stilo now. Did it today with mark my girlfriends dad and it looks a lot better.

PICTURES NOWWW