Peugeot 306 meridian induction kit
Forums » Problems » Peugeot 306 meridian induction kit
Bookmark:          |
no problem fella anything you need its what we are all here for.
Phil Holmes
Philholmes87@hotmail.co.uk
1998 BMW E36 318IS - RED
"
Quote:That pipe was obviously put there for a reason Phil I wouldn't tuck it out the way let alone bend it. It might be a vacumm line that keeps your engine stable. Your mate might say he hasn't had any problems but you don't know what damage its doing till its too late. If oil can't get to the right chambers because of the wrong pressure your buggered all for the sake of a couple of quid for a hose nipple."
Phil no dazzi that bottom one with the yellow clip on is just a breather pipe for the engine :S it just sends air from air box to there. so a small breather hose from halfords will clip right on. and then bolt the piper cross filter directly on throttle body. that hose at the back i would recommend just bending it down and cable tieing it somewhere fella just incase you need it at a later date.
wasnt my mate it was my cousin and he had the 306 for 4 years before he got bored with it. and the 306 is still going strong with its new owner and hes had it for about a year now. with no problems apart from his clutch going
Phil Holmes
Philholmes87@hotmail.co.uk
1998 BMW E36 318IS - RED
"see... its a pipe for his clutch 
"
lol what and it finally failed after 5 year? lol im just going on his car me. i dont know my self all i know is thats what he did and it worked fine. but if your not too sure then better to be on the safe side and go with your gut
Phil Holmes
Philholmes87@hotmail.co.uk
1998 BMW E36 318IS - RED
Male, DerbyUnited Kingdom
Make: Peugeot
Model: 306 meridean special edition
Total Posts 205
so whats a hose nipple and where do i get one from ?
Male, DerbyUnited Kingdom
Make: Peugeot
Model: 306 meridean special edition
Total Posts 205
right well i have just bin to a local modification shop and ordered a pipercross cone filter he said i need breathers on both of the pipes and they do not actually sell ones for my model so i had to by some rubber spacers. £130 well spent i hope it works.
Male, DerbyUnited Kingdom
Make: Peugeot
Model: 306 meridean special edition
Total Posts 205
yay finally got my induction kit i will be fitting that 2nyt.
i wouldn't kink a breather pipe if you get adverse pressure it'll blow seals left right + centre weather it be gearbox engine diff.
Money well spent? Have you even fitted it and tested the car?